OpenArt Logo
Sign in
Prompt: 2d layout for a welding booth length 6m width 4.2m Have 5 welding table in it which is just beside the wall, 1m distance between each table. Have 2 door 1.2m each
Willliam Cheng

Willliam Cheng

Model: OpenArt SDXL

Prompt:

2d layout for a welding booth length 6m width 4.2m Have 5 welding table in it which is just beside the wall, 1m distance between each table. Have 2 door 1.2m each
Width: 1024
Height: 1024
Scale: 7
Steps: 25
Seed: 912171327
Sampler: DPM++ 2M SDE Karras

Create your first image using OpenArt.

With over 100+ models and styles to choose from, you can create stunning images.

More images like this
Prompt: Great Plan 2D Fabric Layout with robot mashins and facilities
Prompt:
Prompt: Set Up Your Software Workspace: Open SketchUp (or your preferred 3D modeling software). Set the units to feet in the model settings to make it easier to input measurements directly. Create the Base Level (Level 1): Draw a rectangle for the base floor measuring 30 ft x 30 ft. Use the Push/Pull tool to raise this rectangle by 8 ft to represent the walls. This forms an open box. Create a group or component from this box to make it easier to move or modify later. Add the Ceiling for Level 1: Draw another 30 ft x 30 ft rectangle on top of the walls to create the ceiling. Keep this ceiling as a separate group or component to allow easy modification of individual levels. Create the Second Level: Draw a 20 ft x 20 ft rectangle on top of the first level's ceiling (it should be centered if you want uniform walls). Use the Push/Pull tool to extrude this by 8 ft for the second level walls. Repeat the steps to add a 20 ft x 20 ft ceiling on top of the second level. Add Additional Levels (Level 3 and Level 4): Repeat the steps above for each level, creating a 20 ft x 20 ft box for Levels 3 and 4. Each level will have walls of 8 ft height, and a 20 ft x 20 ft ceiling/floor. Reduce Material for Shared Floors: For each of the intermediate floors (ceilings for levels below), use the Offset tool to create a border representing 50% less material density or simply mark this by changing color or opacity to signify reduced material thickness. Add Oxygen Tanks: Each tank is a 4 ft x 4 ft x 4 ft cube. Create a cube of this size using the Rectangle and Push/Pull tools. Place the tanks on the floor of each level, ensuring each tank covers 16 sq ft of floor area. Arrange 17 tanks in various levels, keeping livable space open. Check Your Model Dimensions: Use the Measure or Dimension tools to double-check that each wall, ceiling, and floor dimension matches the given specifications. Review each level to confirm the floor and ceiling areas, ensuring all walls are straight and 8 ft tall.
Prompt: Isometry of a two-room cold room with a door for each room and placed side by side, measuring 3.5 meters wide x 2.5 meters deep and 2.5 meters high.
Prompt: CAD model: a gantry crane with servo motor on the single bridge windle
Prompt: A detailed CAD drawing of Audio visual riser diagram
Prompt: Whole Warehouse and storage layout design with floor plan of pharmacy